用于污水再生利用的生物活性炭床的有机物降解特性

以微生物增殖动力学的基本方程-莫诺方程为出发点,通过氮同位素分析比较了具有同源性微生物的生物陶粒滤床和生物活性炭床的有机物生物降解规律,建立了生物活性炭床的有机物生物降解动力学方程,提出在污水再生利用过程中生物活性炭床符合高基质有机物降解动力学模型,即有机物降解呈一级反应动力学方程。以此方程为基础,分析计算了生物活性炭床沿炭床深度的吸附性能,结果表明,在生物活性炭床中,随生物功能的减弱,生物活性炭床对有机物的吸附能力逐渐加强。     

我国城镇居民环保事务参与的性别差异分析

从行为参与、管理参与和环境意识三个方面阐述了当前环保事务参与中存在的性别差异问题；从社会结构的视角分析了性别化对环保参与现状的影响。针对存在的问题和制约因素，从社会系统、社会资源和环境意识三个方面提出发展建议。     

CeO_2/Al_(0.2)Ti_(0.6)Zr_(0.2)O_(1.9)/ATS复合脱硝催化剂的制备及其抗硫抗水性能研究

将预先经酸处理的铝钛硅(ATS)多相陶瓷片先后负载Al0.2Ti0.6Zr0.2O1.9复合氧化物与CeO2活性组分,制得新型CeO2/Al0.2Ti0.6Zr0.2O1.9/ATS复合脱硝催化剂。运用X射线衍射(XRD)、扫描电镜(SEM)手段对该催化剂进行表征,研究催化剂的晶相、微观形貌。评价了催化剂的脱硝活性,研究了H2O和SO2对其脱硝活性的影响。实验结果表明,CeO2/Al0.2Ti0.6Zr0.2O1.9/ATS具有良好的脱硝活性,高活性温度窗口在100～350℃,当反应温度为250℃时,NO的转化率达98.49%。SO2和H2O在一定程度抑制该催化剂的低温脱硝活性,但随着温度的升高,其脱硝活性逐渐恢复。催化剂中活性组分CeO2具有储硫作用,当有SO2存在时,活性温度窗口向高温区偏移了100℃,在250～400℃时,H2O的存在反而提高了催化剂的脱硝活性。     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

序批式生物膜反应器挂膜启动实现短程硝化

常温条件下(20～25℃),以模拟的人工配水为研究对象,采用序批式生物膜反应器(SBBR),在初期挂膜的基础上,笔者运用两种不同的挂膜方式即重新加入新泥和不加新泥而加大进水COD浓度来实现生物膜的快速启动。实验表明,2种挂膜启动通过14 d的培养与富集,NH4+-N与COD的处理效果都能分别达到85%和75%以上。将剩余污泥排尽后,采用第1种挂膜方式的反应器通过连续间歇曝气,达到了比较好的短程硝化效果。调整溶解氧,并且通过先下降后上升曝气量的方式,能进一步提高亚氮的出水。最终在DO为3.6 mg/L时,亚氮的积累率能达到平均74%左右,达到了比较好的亚硝化效果。而第2种挂膜方式培养的生物膜则以好氧反硝化菌为主,去除的氨氮由同化作用和培养的好氧反硝化菌去除,以后者为主。通过比较可以看出,为了实现短程硝化,第1种挂膜方式比第2种更具有优越性,有利于硝化菌种的生长和亚氮的积累,而第2种方式则有利于培养好氧反硝化菌。     

不同因素对人工湿地基质脱氮除磷效果的影响

在人工配制的污水中投入一定量的基质,不同条件下振荡培养,评价沸石、炉渣和陶瓷滤料3种基质在不同因素影响下对氨氮(NH4+-N)和总磷(TP)的吸附能力。结果表明,不同吸附时间时,沸石对NH4+-N的吸附效果最好,陶瓷滤料对TP的吸附效果最好;进水浓度对沸石吸附NH4+-N的影响较大,其吸附量随进水浓度的增大而增大,进水浓度对炉渣和陶瓷滤料吸附NH4+-N及炉渣吸附TP影响不大;3种基质对NH4+-N和TP的吸附量均是随吸附剂量的增加而降低,要达到较好的去污效果,应根据实验结果考虑基质投入量;pH值对沸石吸附NH4+-N影响显著,pH值6～7范围内吸附效果最好,pH值8～12的碱性条件有利于基质对TP的吸附。     

活性碳纤维吸附废气中的丙烯酸和甲苯

采用动态吸附法探讨了在活性碳纤维对模拟废气中丙烯酸和甲苯的吸附过程中,各因素对活性碳纤维穿透吸附量和饱和吸附量的影响。实验结果表明,在模拟废气中丙烯酸质量分数为0.2%、双柱塞泵流量为6.1mL/h、载气流量为1.60L/min的条件下,穿透时间为10min,活性碳纤维的穿透吸附量为227.5mg/g,饱和吸附时间为40min,活性碳纤维的饱和吸附量为460.0m g/g。     

用废变压器油吸收废气中的二甲苯

以废变压器油作为吸收剂对二甲苯废气进行吸收处理,考察了影响二甲苯气体去除率的因素。实验结果表明:二甲苯废气流量为350 L/h、废变压器油喷淋量为40 L/h、进口二甲苯废气平日质量浓度为935 mg/m~3、吸收温度为18℃、吸收时间为50 min时,出口二甲苯气体质量浓度为35 mg/m~3,二甲苯去除率高达96.3%,小于GB16297—1996《大气污染物综合排放标准》中二甲苯质量浓度90 mg/m~3的排放标准。     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

资源型城市贵阳市的生态可持续发展研究

生态可持续发展是资源型城市可持续发展的基础。应用生态足迹的方法,对资源型城市贵阳市的生态可持续发展做了定量评估,并分析了影响贵阳市生态可持续发展的社会经济驱动力。贵阳市1999年-2007年间生态足迹从1.447 hm2/cap增长到2.472hm2/cap,而生态承载力从0.551 hm2/cap下降至0.509 hm2/cap,生态足迹远超出生态承载力,生态系统处于不可持续发展状况。但贵阳市生态效率在不断改善,从1999年的0.500万元GDP/hm2生态足迹增长到2007年的0.787万元GDP/hm2生态足迹,生态系统改善仍存在一定契机。人口增加、能耗增加等因素会导致贵阳市生态足迹增加,而增加农作物播种面积则可减少生态足迹。应用生态足迹的方法,有利于分析资源型城市可持续发展的相关问题,最后就如何缓解贵阳市生态系统压力,促进贵阳市生态可持续发展进行了探讨。